Ascent® ASP-A16050 4896 x 3264 5.5u

This product is no longer available.

Terms and Conditions
Lead time 6-8 weeks, built to order 


  • 1 to 16 MHz 16-Bit digitization
  • Binning up to 8 horizontal x 3264 height
  • Field upgradeable firmware
  • Subarray readout and fast sequencing modes

The Ascent® A16050 has a 16-megapixel interline transfer sensor with high quantum efficiency. The camera is available with a monochrome sensor (A16050) or color (A16050C) sensor with either a Bayer mosaic or TRUESENSE Color Fill Pattern.  

 

Additional Features:

  • 32/64 bit ActiveX drivers included with every system
  • Programmable cooling to 30°C below ambient
  • External triggering and strobe controls
  • Programmable offset and gain
  • Programmable status indicators
  • Dual channel CCD support
  • Moisture free chambers
  • Video focus mode
  • Precision locking filter wheels optional

CCD Specifications
CCDKodak KAI-16050
Array Size (pixels)4896 x 3264
Pixel Size5.5 x 5.5 microns
Imaging Area26.93 x 17.95mm
Imaging Diagonal32.36mm
Linear Full Well (typical)20K electrons
Dynamic Range64 dB
QE at 400nm36%
Peak QE (500nm)46%
Anti-blooming>300X
Camera System Performance
PC InterfaceUSB 2.0
Max. Cable Length5 meters between hubs, 5 hubs maximum (max. total of 30m); or up to 50m with icron 2.0 Ranger extender
Digital Resolution16 bits (single channel): 3.3 and 8Mpixels/sec; 8 MHz (dual channel): 16Mpixels/sec
System Noise (typical)6 e- RMS at 16 MHz
Pixel Binning1 x 1 to 8 x 3264 on chip
Exposure Time100 microseconds to 183 minutes (2.56 microsecond increments)
Image Sequencing1 to 65535 image sequences under software control
Frame SizesFull frame, subframe, focus mode
Cooling (typical)Thermoelectric cooler with forced air. Maximum cooling 30°C below ambient temperature.
Dark Current (typical)0.15 e-/pixel/sec (-5°C)
Temperature Stability+/- 0.1°C
Operating Environment--30° to 35°C. Relative humidity: 10 to 90% non-condensing.
Power20W maximum power with cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60Hz). Alternate 6V input from user's source.
Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger.
Camera Head SizeAluminum. 3.2" x 4.7" x 1.3" (8.1 x 11.9 x 3.3 cm). Weight: 1.4 lb. (0.65 kg)
Back Focal DistanceStandard: 0.32" (0.81cm). [optical]
Mounting1.5" x 2.5" bolt pattern, 6-32 thread. Optional C-mount (1" 32 tpi thread), Nikon F-mount, or 2" slip-fit adapters.
Op. System SupportWindows, Macintosh, Linux


 

** All special prices are 100% prepaid, direct sales