Ascent® ASP-A2050 1600 x 1200 5.5u

US $ 2,578.00 US $ 2,578.00 2578.0 USD

US $ 2,578.00

    This combination does not exist.

    Add to Cart

    • 1 to 16 MHz 16-Bit digitization
    • Binning up to 8 horizontal x 1200 height
    • Field upgradeable firmware
    • Subarray readout and fast sequencing modes

    The Ascent A2050 has a 2-megapixel interline transfer sensor with low noise and high quantum efficiency. The camera is available with a monochrome (A2050) or color (A2050C) sensor. Small pixels are ideal for microscopy.  


    Additional Features:

    • 32/64 bit ActiveX drivers included with every system
    • Programmable cooling to 35°C below ambient
    • External triggering and strobe controls
    • Programmable offset and gain
    • Programmable status indicators
    • Dual channel CCD support
    • Moisture free chambers
    • Video focus mode
    • Precision locking filter wheels optional

    CCD Specifications
    Array Size (pixels) 1600 x 1200
    Pixel Size 5.5 x 5.5 microns
    Imaging Area 8.8 x 6.6mm (58.1mm2)
    Imaging Diagonal 11mm
    Linear Full Well (typical) 20K electrons
    Dynamic Range 64 dB
    QE at 400nm 32%
    Peak QE (500nm) 50%
    Anti-blooming 300X
    Camera System Performance
    PC Interface USB 2.0
    Max. Cable Length 5 meters between hubs, 5 hubs maximum (max. total of 30m); or up to 50m with icron 2.0 Ranger extender
    Digital Resolution 16 bits (single channel): 3.3 and 8Mpixels/sec; 8 MHz (dual channel): 16Mpixels/sec
    System Noise (typical) 6 e- RMS at 3 MHz; 7 e- RMS at 8/16 MHz
    Pixel Binning 1 x 1 to 8 x 1200 on chip
    Exposure Time 100 microseconds to 183 minutes (2.56 microsecond increments)
    Image Sequencing 1 to 65535 image sequences under software control
    Frame Sizes Full frame, subframe, focus mode
    Cooling (typical) Thermoelectric cooler with forced air. Maximum cooling 35°C below ambient temperature.
    Dark Current (typical) 0.01 e-/pixel/sec (-10°C)
    Temperature Stability +/- 0.1°C
    Operating Environment -30° to 35°C. Relative humidity: 10 to 90% non-condensing.
    Power 20W maximum power with cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60Hz). Alternate 6V input from user's source.
    Remote Triggering LVTTL input allows exposure to start within 25 microseconds of rising edge of trigger.
    Camera Head Size Aluminum. 3.2" x 4.7" x 1.3" (8.1 x 11.9 x 3.3 cm). Weight: 1.4 lb. (0.65 kg)
    Back Focal Distance Standard: 0.32" (0.81cm). [optical]
    Mounting 1.5" x 2.5" bolt pattern, 6-32 thread. Optional C-mount (1" 32 tpi thread), Nikon F-mount, or 2" slip-fit adapters.
    Op. System Support Windows, Macintosh, Linux


    CCD Sensitivity 

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products