ASP-WNMPC08 Motion Controller

US $ 1,195.00 1195.0 USD US $ 1,195.00

US $ 1,195.00

    This combination does not exist.

    Terms and Conditions
    Lead time 6-8 weeks, built to order 


    4 Models

    • Motion controller ASP- WNMPC08 – 100B (stepper Moter) – Single Axis
    • Motion Controller ASP- WNMPC08 – 200B (Stepper Motor) – Two Axis
    • Motion Controller ASP- WNMPC08 – 300B (Stepper Motor) – Three Axis
    • Motion Controller ASP-WNMPC08 – 400B (Stepper Motor) – Four Axis

    Manual of Motion Controller Operation

    1. Installation of the hardware

    (1) Insert the PCI motion control card in the PC.
    (2) Connect the motion controller to the PCI card via the cable.
    (3) Connect the stages to the motion controller via the DB-9 cables.

    2. Installation of the software

    (1) Double-click the installation file and install the driver and demo program in the PC.
    (2) After the installation of the software, run the demo program and setup the parameters according to your special requirement then operate the stages via the PC software.

    3. Making your own software

    (1) Program your own software via VB or VC.
    (2) Refer to the Manual of Function Library, which explains the Function Library in detail.

    Product names and model

    Motion controller ASP- WNMPC08 – 100B (stepper Moter) – Single Axis

    Motion Controller ASP- WNMPC08 – 200B (Stepper Motor) – Two Axis
    Motion Controller ASP- WNMPC08 – 300B (Stepper Motor) – Three Axis

    Motion Controller ASP-WNMPC08 – 400B (Stepper Motor) – Four Axis