Tucsen Dhyana 95

US $ 16,750.00 16750.0 USD US $ 16,750.00

US $ 16,750.00

    This combination does not exist.

    Terms and Conditions
    Lead time 6-8 weeks, built to order 


    • Quantum Efficency: 95%@560nm

    • 2048X2048 Resolution

    • Monochrome

    • 24fps@(2048x2048 via USB3.0)

    The Dhyana95 uses backside-illuminated sCMOS thinned chip technology to avoid light interference from the wiring layer, thereby increasing the pixel area and improving the photoelectric conversion rate.

    At 560nm, the quantum efficiency of Dhyana 95 is 95%, which a front illuminated sCMOS camera cannot match, and is comparable to the best EMCCD camera.

    The Dhyana95 read noise is only 1.45 electrons(peak), therefore the signal to noise ratio is significantly better than other sCMOS cameras, and when the incident photons are>3, there is a better performance than EMCCD based cameras

    The 2" array can not only adapt to more optical interfaces and deliver a greater field of view, but also results in fewer lens switches to find the area of interest on the sample.

    Under very weak laser illumination (< 0.002 kW cm-2 ), Dhyana 95 camera showed comparable fluorescent intensity to the 97%QE EMCCD camera with 100 EM gain. On the other hand, Dhyana 95 had similar background fluorescence noise when comparing to the 82%QE sCMOS camera, which has 1.0e-low read noise.

    STORM stochastic optical imaging microscopy is one of the most widely used and the highest resolution super-resolution methods. It requires a camera to have the performance advantages of high quantum efficiency, high frame rate and low noise in the visible range. Its spatial resolution is determined by the single molecule localization accuracy and Nyquist resolution simultaneously.


    • Sensor size

    • 2〃

    • Sensor model

    • G400 BSI (Backside-illuminated sCMOS)

    • Color/monochrome

    • Monochrome

    • Quantum efficency

    • 95%@560nm

    • Effective no. of pixels

    • 2048(H) x 2048(V)

    • Pixel size

    • 11 x 11(μm)

    • Effective area

    • 22.528× 22.528(mm)

    • Full well capacity

    • 90,000e-

    • Frame rate

    • 24fps@(2048x2048 via USB3.0)

    • Readout noise

    • 1.45e-(Peak), 1.71e-(Median)

    • Shutter type

    • Rolling shutter

    • Exposure mode

    • Manual / Auto

    • Exposure time

    • 0.021ms-10s

    • Cooling method

    • Peltier cooling

    • Cooling temperature

    • Forced air(Ambient at +25℃):-10 ℃

    • Dark current

    • 3 electrons/pixel/s(0 ℃)(typ.)

    • 1.5 electrons/pixel/s (-10 ℃)(typ.)

    • Dynamic range

    • 86dB

    • Sub-array

    • available

    • External trigger mode

    • Standard/Synchronous/Global trigger

    • Trigger delay function

    • 0-10s(1μs steps)

    • Trigger output

    • 3 programable timing output (Exposure/Global/readout signal)

    • External trigger routing

    • SMA

    • Digital interface

    • USB3.0

    • SDK

    • Support

    • Bit depth

    • 16 bit

    • Lens mount

    • T or C-mount

    • Power supply

    • 12V/8A

    • Power consumption

    • 50W

    • Camera size

    • 120 x 119 x 121 (mm)

    • Parameter settings

    • White balance, Exposure, Contrast, Gamma, 3D denoise, Saturation, Flat fielding

    • PC software

    • Mosaic/LabVIEW/Matlab/Micromanager

    • Compatible system

    • Windows/Linux/Mac

    • Operating temperature

    • 0-60℃

    • Operating humidity

    • 10%-85% RH