Follow us

Ascent® ASP-A16050 4896 x 3264 5.5u

    US $ 6,238.00 6238.0 USD US $ 6,238.00

    US $ 6,238.00

    This combination does not exist.

    Terms and Conditions
    30-day money-back guarantee
    Shipping: 2-3 Business Days

    • 1 to 16 MHz 16-Bit digitization
    • Binning up to 8 horizontal x 3264 height
    • Field upgradeable firmware
    • Subarray readout and fast sequencing modes

    The Ascent® A16050 has a 16-megapixel interline transfer sensor with high quantum efficiency. The camera is available with a monochrome sensor (A16050) or color (A16050C) sensor with either a Bayer mosaic or TRUESENSE Color Fill Pattern.  


    Additional Features:

    • 32/64 bit ActiveX drivers included with every system
    • Programmable cooling to 30°C below ambient
    • External triggering and strobe controls
    • Programmable offset and gain
    • Programmable status indicators
    • Dual channel CCD support
    • Moisture free chambers
    • Video focus mode
    • Precision locking filter wheels optional

    CCD Specifications
    CCDKodak KAI-16050
    Array Size (pixels)4896 x 3264
    Pixel Size5.5 x 5.5 microns
    Imaging Area26.93 x 17.95mm
    Imaging Diagonal32.36mm
    Linear Full Well (typical)20K electrons
    Dynamic Range64 dB
    QE at 400nm36%
    Peak QE (500nm)46%
    Camera System Performance
    PC InterfaceUSB 2.0
    Max. Cable Length5 meters between hubs, 5 hubs maximum (max. total of 30m); or up to 50m with icron 2.0 Ranger extender
    Digital Resolution16 bits (single channel): 3.3 and 8Mpixels/sec; 8 MHz (dual channel): 16Mpixels/sec
    System Noise (typical)6 e- RMS at 16 MHz
    Pixel Binning1 x 1 to 8 x 3264 on chip
    Exposure Time100 microseconds to 183 minutes (2.56 microsecond increments)
    Image Sequencing1 to 65535 image sequences under software control
    Frame SizesFull frame, subframe, focus mode
    Cooling (typical)Thermoelectric cooler with forced air. Maximum cooling 30°C below ambient temperature.
    Dark Current (typical)0.15 e-/pixel/sec (-5°C)
    Temperature Stability+/- 0.1°C
    Operating Environment--30° to 35°C. Relative humidity: 10 to 90% non-condensing.
    Power20W maximum power with cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60Hz). Alternate 6V input from user's source.
    Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger.
    Camera Head SizeAluminum. 3.2" x 4.7" x 1.3" (8.1 x 11.9 x 3.3 cm). Weight: 1.4 lb. (0.65 kg)
    Back Focal DistanceStandard: 0.32" (0.81cm). [optical]
    Mounting1.5" x 2.5" bolt pattern, 6-32 thread. Optional C-mount (1" 32 tpi thread), Nikon F-mount, or 2" slip-fit adapters.
    Op. System SupportWindows, Macintosh, Linux


    ** All special prices are 100% prepaid, direct sales